Hollow-Fiber Membranes, Cartridges & Filtration Equipment
Microfiltration hollow-fiber membranes are our main product, which can be packaged into cartridges of many sizes, and new formats are developed flexibly.
Request Product Data OEM & Customization InquiryVisual meaning: The bundled hollow fibers illustrate how membrane materials and module assembly together shape filtration product quality.
Hollow Fiber Membranes
Hollow-fiber membranes in different materials are our main product.
PES
One of our hollow-fiber membrane materials.
Nylon
One of our hollow-fiber membrane materials.
PVDF
One of our hollow-fiber membrane materials.
PP
One of our hollow-fiber membrane materials.
Chemical structure diagrams, illustrative only.
Pore size, flux and suitable conditions vary by model; please request technical data for specifications.
Filter Cartridges
Cartridges can be packaged in many sizes, and new formats are developed flexibly.
Hollow-fiber cartridges
Melt-blown cartridges
Pleated cartridges
Activated carbon & sintered cartridges
PP cartridges
Filter bags / bag-type and cartridge-type filters
Consumer Products
World's smallest thumb-sized portable outdoor water filter
"World's smallest" is the product/award name used by the 2024 Taiwan Excellence Awards (32nd, Silver Award) organizers, not a measured engineering figure.
164 g, foldable for carrying.
3R concealed PET-bottle filter cartridge
Award-winning product. Please request product data for specifications and applications.
Faucet-mounted bacteria-removing water purifier
A replacement-cartridge 2-pack is also available; uses a 0.2 μm-pore MF-PES hollow-fiber membrane.
Lightweight portable water filter / Kuma Drink filter bottle
Available through Kuma Academy (黑熊學院), 桃園嚴選 i OPEN Mall and T.Select.
HME × mbranfiltra CapGo Collaborative Series
HME is mbranfiltra’s general distributor for outdoor sports products in Taiwan. Our first collaborative product range is the CapGo ultralight water filtration series, including the 28mm filter, 42mm filter, 1L filter bag (42mm) and 3L filter bag (42mm).
Find by Industry
Filters the spec cards below by the applications printed on each card's own source image. A card appears only under industries its source lists; cards whose source lists no application appear under "All" only.
Filter Housings & Spec Sheets
Housings and household cartridges from the company catalog. Each card lists key points; expand "Full spec" or open the original images for complete details.
SM — sanitary cartridge housing
2–6 cartridges, 10"–40"; 3–24 m³/hr · SUS304 / SUS316 / SUS316L; 1"–2" sanitary clamp · Design 10 kg/cm² (150 psi); operating 7 kg/cm² (100 psi) · Internal & external polishing 400 mesh
Full spec
- Catalog name: SM Sanitary Cartridge Filter.
- Applications listed: beverage, pharmaceutical, CDA/N2, air filtration, chemical processing.
- Material SUS304 / SUS316 / SUS316L;
- inlet & outlet 1"–2" sanitary clamp fittings;
- exhaust port 1/4" PT-F;
- O-ring EPDM, optional silicone, Viton or Teflon-coated Viton;
- designed pressure 10 kg/cm² (150 psi);
- operating pressure 7 kg/cm² (100 psi);
- surface internal & external polishing 400 mesh, optional X-ray or EP electrolysis.
- Ordering code: cartridges 2–6;
- length 1–4 = 10"/20"/30"/40";
- material 4 / 6 / 6L;
- size 04 = 1/2", 06 = 3/4", 10 = 1", 15 = 1-1/2", 20 = 2", 25 = 2-1/2";
- connection P / N / J / A / D / C;
- O-ring E / V / S / N / Q;
- cartridge fitting 0 = DOE, 5 = 222, 6 = 226;
- finish E electrolysis, P polished.
- Parts (14, bilingual, English-site drawing): clamp, vent, top cover, O-ring, threaded rod, nut, pressure plate, shell flange, shell, handle, base, outlet, inlet, support leg.
- Dimensions for 2–6 cartridges at 10" / 20" / 30" / 40": A Ø232;
- B 675 / 930 / 1175 / 1425 mm;
- C 120;
- D 332;
- E (PCD) Ø368;
- F Ø12;
- flow 3–6 / 6–12 / 9–18 / 12–24 m³/hr;
- 15–13 (as printed;
- likely a typo) / 30–60 / 45–90 / 60–120 GPM;
- weight 21 / 26 / 29.5 / 33 kg;
- capacity 14 / 24 / 35 / 45 L.
AF — single-cartridge water-tower housing
Single cartridge, 10" or 20", for water towers · SUS304 / SUS316; 3/4"–1" PT-M · Design 10 kg/cm² (150 psi); operating 7 kg/cm² (100 psi) · Spec table and ordering codes differ on material/size — see full spec
Full spec
- Catalog name: AF Single Cartridge Water Tower Filter.
- Application listed: water tower filtration.
- Material SUS304 / SUS316;
- inlet & outlet 3/4"–1" PT-M;
- discharge port 3/4" PT-M;
- exhaust port 3/4"–1" PT-F;
- O-ring EPDM, optional Viton or Teflon-coated Viton;
- designed pressure 10 kg/cm² (150 psi);
- operating pressure 7 kg/cm² (100 psi);
- surface external electrolysis and internal pickling, optional X-ray or EP electrolysis.
- Ordering code: length 1 = 10", 2 = 20";
- material 4 = SUS304;
- size 10 = 1";
- connection P = PT, N = NPT;
- O-ring E / V / S / N;
- cartridge fitting 0 = DOE, 5 = 222;
- finish A pickling, E electrolysis, P polished.
- Note: the spec table lists SUS316 and 3/4" connections, but the ordering codes only list SUS304 and 1" — shown as printed, not resolved here.
- Parts (8, bilingual, English-site drawing): clamp, top cover, O-ring, shell flange, 2-in-1 filter cartridge, shell, bottom cover, support leg.
- Dimensions 1PC-10" / 1PC-20": A Ø180 / Ø180;
- B 445 / 695 mm;
- C 120;
- D 280;
- E (PCD) Ø236;
- weight 8 / 9.7 kg.
SL — sanitary single-cartridge housing
Single cartridge, 10"/20"/30"; 1–3 m³/hr · SUS304 / SUS316 / SUS316L; sanitary clamp (sites differ: 1" vs 1"–2") · Design 10 kg/cm² (150 psi); operating 7 kg/cm² (100 psi) · Internal & external polishing 400 mesh
Full spec
- Catalog name: SL Sanitary Single Cartridge Filter.
- Applications listed: beverage, manufacturing, chemical processing, ultrapure water filtration.
- Material SUS304 / SUS316 / SUS316L;
- inlet & outlet: the Chinese-site sheet says 1" sanitary clamp, the English-site sheet says 1"–2" sanitary clamp fittings, and both sites' ordering codes list only 06 = 3/4" and 10 = 1" — shown as printed, not resolved here.
- Discharge port 1/4" PT-F;
- exhaust port 1/4" PT-F;
- O-ring EPDM, optional silicone, Viton or Teflon-coated Viton;
- designed pressure 10 kg/cm² (150 psi);
- operating pressure 7 kg/cm² (100 psi);
- surface internal & external polishing 400 mesh, optional X-ray or EP electrolysis.
- Ordering code: length 1–3 = 10"/20"/30";
- material 4 / 6 / 6L;
- size 06 = 3/4", 10 = 1";
- connection P / N / J / A / D / C;
- O-ring E / V / S / T (Teflon) / N;
- cartridge fitting 0 = DOE, 5 = 222, 6 = 226;
- finish E electrolysis, P polished.
- Parts (9, bilingual, English-site drawing): clamp, vent, shell, filter cartridge, shell flange, gasket, base, inlet/outlet port, support leg.
- Dimensions 1PC-10" / 20" / 30": A Ø106;
- B 500 / 750 / 1000 mm;
- C 77;
- D 207;
- flow 1 / 2 / 3 m³/hr;
- 5 / 10 / 15 GPM;
- weight 4.5 / 6 / 7.5 kg.
Plastic housings & pure-PP housings (222 / 226 type)
Plastic housings: standard (1 m³/hr) or high-flow (4.5 m³/hr), 10"/20", 50°C · Pure-PP 222 type: 3/4"–1" NPT, 0.6 MPa @20°C, 60°C · Pure-PP 226 type: DN40 / JIS40A, 0.6 MPa @20°C, 60°C
Full spec
- Plastic housing: standard 10"/20" (PP blue / AS clear, ¼"–¾" NPT, 125 psi / 8.8 kg/cm² max (both sites print the unit as "kg/cm3"), 1 m³/hr) or high-flow 10"/20" (PP blue / PC clear, 1"–1.5" NPT, 100 psi / 7 kg/cm² max, 4.5 m³/hr);
- both rated to 50°C.
- Pure-PP housing, 222 type: 10"/20", PP base and body, stainless steel bracket, EPDM seal, 3/4"–1" NPT, 0.6 MPa @ 20°C, 60°C max.
- Pure-PP housing, 226 type: 10"/20", same base/body/bracket, EPDM/Silicone/Viton seal, DN40/JIS40A, 0.6 MPa @ 20°C, 60°C max.
ALS single-cartridge housing (catalog name: ALS Single Cartridge Filter)
Single cartridge, 10"/20"/30"; 1–3 m³/hr · SUS304 / SUS316; 3/4" PT or 1" PT-F / NPT-F · Design 10 kg/cm² (150 psi); operating 7 kg/cm² (100 psi) · Listed uses: circulation, chemical processing, PCW
Full spec
- Catalog name: ALS Single Cartridge Filter.
- Applications listed: circulation filtration, chemical processing, PCW filtration.
- Material SUS304 / SUS316;
- inlet & outlet 3/4" PT, 1" PT-F / NPT-F;
- discharge port 1/4" PT-F;
- exhaust port 1/4" PT-F;
- designed pressure 10 kg/cm² (150 psi);
- operating pressure 7 kg/cm² (100 psi);
- O-ring EPDM, optional Viton or Teflon-coated Viton;
- surface external electrolysis and internal pickling, optional X-ray or EP electrolysis.
- Ordering code: length 1–3 = 10"/20"/30";
- material 4 / 6 / 6L (the spec table lists only SUS304 and SUS316);
- size 06 = 3/4", 10 = 1";
- connection P / N / J / A / D / C;
- O-ring E / V / S / N;
- cartridge fitting 0 = DOE, 5 = 222, 6 = 226;
- finish A pickling, E electrolysis, P polished.
- Parts (9, bilingual): clamp, head, O-ring, shell, springs, screw rod, nut, bottom cover, drain.
- Dimensions 1PC-10" / 20" / 30": A Ø106;
- B 395 / 645 / 895 mm;
- C 97;
- D 50;
- flow 1 / 2 / 3 m³/hr;
- 5 / 10 / 15 GPM;
- weight 4 / 5.5 / 7 kg.
AL 3–7 cartridge housing (catalog name: AL 3~7 Cartridges Filter)
3–7 cartridges, 10"–40"; 3–28 m³/hr · SUS304 / SUS316 / SUS316L; 1"–3" threaded, flange or sanitary · Design 10 kg/cm² (150 psi); operating 7 kg/cm² (100 psi) · Spec table says 1"–3"; ordering codes list 1/2"–4"
Full spec
- Catalog name: AL 3~7 Cartridges Filter.
- Applications listed: beverage, RO prefiltration, PCW filtration, circulation filtration, chemical processing.
- Material SUS304 / SUS316 / SUS316L;
- inlet & outlet 1"–3" threaded, flange or sanitary fittings;
- discharge port 3/4" PT-M;
- exhaust port 1/4" PT-F;
- designed pressure 10 kg/cm² (150 psi);
- operating pressure 7 kg/cm² (100 psi);
- O-ring EPDM, optional Viton or Teflon-coated Viton;
- surface external electrolysis and internal pickling, optional X-ray or EP electrolysis.
- Ordering code: cartridges 3–7;
- length 1–4 = 10"/20"/30"/40";
- material 4 / 6 / 6L;
- size 04 = 1/2", 06 = 3/4", 10 = 1", 15 = 1-1/2", 20 = 2", 25 = 2-1/2", 30 = 3", 40 = 4" (the spec table says 1"–3");
- connection P / N / J / A / D / C;
- O-ring E / V / S / N / Q;
- cartridge fitting 0 / 5 / 6;
- finish A pickling, E electrolysis, P polished.
- Parts (19, bilingual): vent, top cover, clamp, O-ring, shell flange, pressure-plate nut, pressure plate, threaded rod, springs, shell, inlet, cartridge post, seat-plate nut, cartridge seat plate, pedestal, drain, outlet, bottom cover, support leg.
- Dimensions (A / B / C / D / E / F PCD mm;
- flow m³/hr;
- GPM;
- kg;
- L): 3~4PC-10" Ø180 / 620 / 280 / 120 / 300 / Ø236;
- 3~4;
- 15~20; 15;
- 14 — 3~4PC-20" B 885;
- 6~8;
- 30~40; 18;
- 21 — 3~4PC-30" B 1140;
- 9~12;
- 45~60; 20;
- 28 — 5~7PC-10" Ø232 / 620 / 280 / 120 / 352 / Ø288;
- 5~7;
- 25~35; 21;
- 23 — 5~7PC-20" B 885;
- 10~14;
- 50~70; 25;
- 34 — 5~7PC-30" B 1140;
- 15~21;
- 75~105; 28;
- 45 — 5~7PC-40" B 1395;
- 20~28;
- 100~140; 31; 55.
AM high-flow multi-cartridge housing (catalog name: AM High-Flow Multi-Cartridge Filter)
8–220 cartridges, 30" or 40" · SUS304 / SUS316 / SUS316L; 2"–14" flange or sanitary (codes list up to 12") · Design 10 kg/cm² (150 psi); operating 7 kg/cm² (100 psi) · 22 size configurations: 77–1247 kg, 89–2238 L
Full spec
- Catalog name: AM High-Flow Multi-Cartridge Filter.
- Applications listed: beverage, RO prefiltration, PCW filtration, circulation filtration, chemical processing, reclaimed water filtration.
- Material SUS304 / SUS316 / SUS316L;
- inlet & outlet 2"–14" flange or sanitary fittings;
- discharge port 1" PT-F;
- exhaust port 2" PT-F;
- designed pressure 10 kg/cm² (150 psi);
- operating pressure 7 kg/cm² (100 psi);
- O-ring EPDM, optional Viton or Teflon-coated Viton;
- surface external electrolysis and internal pickling, optional X-ray or EP electrolysis.
- Ordering code: cartridges 8–220;
- length 3 = 30", 4 = 40";
- material 4 / 6 / 6L;
- size 20 = 2", 30 = 3", 40 = 4", 50 = 5", 60 = 6", 80 = 8", Y = 10", Y2 = 12" (the spec table says up to 14");
- connection P / N / J / A / D / C;
- O-ring E / V / S / N / Q;
- cartridge fitting 0 / 5 / 6;
- finish A pickling, E electrolysis, P polished, S sandblasting.
- Parts (20, bilingual;
- "drain" is listed twice, as items 16 and 19): turntable, davit, vent, top cover flange, pressure-plate nut, pressure plate, springs, eye bolt, O-ring, shell flange, inlet, shell, cartridge post, pedestal, cartridge seat plate, drain, outlet, bottom cover, drain, support leg.
- The dimension table lists 22 configurations from 8~12PC-30" to 186~220PC-40": inlet/outlet 2"–4" F up to 10"–12" F, shell Ø306–Ø1220 mm, height B 1638–2715 mm, weight 77–1247 kg, capacity 89–2238 L — see the original image for each row.
AH / AV 3–7 cartridge high-pressure housings (catalog name: AH/AV 3~7 Cartridges High-Pressure Filter)
AH: 3–4 cartridges, 10"–30", 3–12 m³/hr · AV: 5–7 cartridges, 10"–40", 5–28 m³/hr · Design 15 kg/cm² (225 psi); operating 10 kg/cm² (150 psi) · SUS304 / SUS316 / SUS316L; 1"–4" threaded, flange or sanitary
Full spec
- Catalog name: AH/AV 3~7 Cartridges High-Pressure Filter (one shared spec sheet).
- Applications listed: beverage, RO prefiltration, PCW filtration, circulation filtration, chemical processing, reclaimed water filtration.
- Material SUS304 / SUS316 / SUS316L;
- inlet & outlet 1"–4" threaded, flange or sanitary fittings;
- discharge port 3/4" PT-M;
- exhaust port 1/4" PT-F;
- designed pressure 15 kg/cm² (225 psi);
- operating pressure 10 kg/cm² (150 psi);
- O-ring EPDM, optional Viton or Teflon-coated Viton;
- surface external electrolysis and internal pickling, optional X-ray or EP electrolysis.
- Ordering code: AH takes 3 or 4 cartridges, length 1–3 (10"–30"), sizes 04–30 (1/2"–3");
- AV takes 5, 6 or 7 cartridges, length 1–4 (10"–40"), sizes 04–40 (1/2"–4");
- shared: material 4 / 6 / 6L, connection P / N / J / A / D / C, O-ring E / V / S / N / Q, cartridge fitting 0 / 5 / 6, finish A / E / P / S.
- Parts (18, bilingual): handle, top cover, vent, O-ring, eye bolt socket, eye bolt, pressure-plate nut, pressure plate, shell flange, springs, cartridge post, shell, drain, pedestal, cartridge seat plate, inlet/outlet port, bottom cover, support leg.
- AV dimensions 5~7PC-10" / 20" / 30" / 40": A Ø232;
- B 605 / 860 / 1115 / 1370 mm;
- C 280;
- D 120;
- E 358;
- F Ø288;
- flow 5~7 / 10~14 / 15~21 / 20~28 m³/hr;
- 25~35 / 50~70 / 75~105 / 100~140 GPM;
- 30 / 35 / 40 / 46 kg;
- 23 / 34 / 45 / 55 L.
- AH dimensions 3~4PC-10" / 20" / 30": A Ø180;
- B 625 / 890 / 1145 mm;
- C 280;
- D 120;
- E 300;
- F Ø236;
- flow 3~4 / 6~8 / 9~12 m³/hr;
- 15~20 / 30~40 / 45~60 GPM;
- 25 / 30 / 35 kg;
- 18 / 27 / 36 L.
AHS single-cartridge high-pressure housing (catalog name: AHS Single Cartridge High-Pressure Filter)
Single cartridge, 10"/20"/30"; 1–3 m³/hr · SUS304 / SUS316; 1/2"–1.5" threaded or flange · Design 15 kg/cm² (225 psi); operating 10 kg/cm² (150 psi) · Listed uses: circulation, chemical processing, PCW
Full spec
- Catalog name: AHS Single Cartridge High-Pressure Filter.
- Applications listed: circulation filtration, chemical processing, PCW filtration.
- Material SUS304 / SUS316;
- inlet & outlet 1/2"–1.5" threaded or flange;
- discharge port 1/2" PT-M;
- exhaust port 1/4" PT-F;
- designed pressure 15 kg/cm² (225 psi);
- operating pressure 10 kg/cm² (150 psi);
- O-ring EPDM, optional Viton or Teflon-coated Viton;
- surface external electrolysis and internal pickling, optional X-ray or EP electrolysis.
- Ordering code: length 1–3 = 10"/20"/30";
- material 4 / 6 / 6L (the spec table lists only SUS304 and SUS316);
- size 04 = 1/2", 06 = 3/4", 10 = 1", 15 = 1-1/2", 20 = 2" (the spec table says up to 1.5");
- connection P / N / J / A / D / C;
- O-ring E / V / S / N;
- cartridge fitting 0 / 5 / 6;
- finish A pickling, E electrolysis, P polished.
- Parts (14, bilingual): handle, top cover, gasket, springs, hex nut set, shell flange, shell, cartridge post, pedestal, inlet, cartridge seat plate, outlet, bottom cover, support leg.
- Dimensions 1PC-10" / 20" / 30": A Ø106;
- B 536 / 786 / 1036 mm;
- C 210;
- D 105;
- E 165;
- F Ø156;
- flow 1 / 2 / 3 m³/hr;
- 5 / 10 / 15 GPM;
- weight 12.5 / 16 / 19.5 kg.
SG cartridge housing (catalog name: SG Cartridge Filter)
Single cartridge, 10"/20"/30" · SUS304 / SUS316 / SUS316L; 1"–2" clamp · Design 10 kg/cm² (150 psi); operating 7 kg/cm² (100 psi) · Listed uses: beverage, pharmaceutical, CDA/N2, air, chemical
Full spec
- Catalog name: SG Cartridge Filter.
- Applications listed: beverage, pharmaceutical, CDA/N2, air filtration, chemical processing.
- Material SUS304 / SUS316 / SUS316L;
- inlet & outlet 1"–2" clamp;
- discharge port 1/4" PT-F;
- exhaust port 1/4" PT-F;
- O-ring EPDM, optional Viton or Teflon-coated Viton;
- designed pressure 10 kg/cm² (150 psi);
- operating pressure 7 kg/cm² (100 psi);
- surface polishing & grinding, optional X-ray or EP electrolysis.
- Ordering code: length 1–3 = 10"/20"/30";
- material 4 / 6 / 6L;
- size 04 = 1/2", 06 = 3/4", 10 = 1", 15 = 1-1/2" (the spec table says 1"–2");
- connection P / N / J / A / D / C;
- O-ring E / V / S / T (Teflon) / N;
- cartridge fitting 0 / 5 / 6;
- finish E electrolysis, P polished.
- Parts (8, as printed — item 2 is labeled "bottom cover" although drawn at the top, and "shell" is listed twice): clamp, bottom cover, shell, filter cartridge, shell flange, gasket, base, shell.
- Dimensions 1PC-10" / 20" / 30": A Ø106;
- B 493 / 743 / 993 mm;
- C 78;
- D 192;
- weight 4 / 5.3 / 6.5 kg (no flow figures given).
Household Hollow-Fiber Membrane Cartridges
PES hollow-fiber cartridges for household tap water, from the company catalog. Figures come with the test conditions printed on each source card; actual lifespan and flow depend on local water quality.
Household cartridge-style hollow-fiber cartridge (catalog name: Household Cartridge-style Filter with Hollow Fiber Membrane)
PES hollow fiber, 0.2 μm, 0.17 m²; Ø48 × 115 mm · Source: 6,500 L / 16 L/min under its stated tap-water test conditions · Operating 4–40°C, 1–4 kg/cm²; outlet 1/4", P8 or P12 · Actual lifespan and flow depend on local water quality
Full spec
- Chinese-site name: 家用 套筒型濾心 中空纖維膜;
- English-site name: Household Cartridge-style Filter with Hollow Fiber Membrane — same specifications on both sites.
- Features listed on the source card (the supplier's wording;
- no test basis given on the card): high flow rate, long lifespan, high biocompatibility.
- Applications listed: tap water filtration, sterilizing filtration.
- Material polyethersulfone (PES);
- housing / sealing ABS / PU;
- outer diameter Ø48 mm;
- length 115 mm;
- retention rating 0.2 μm;
- connection outlet 1/4", P8, P12;
- membrane area 0.17 m²;
- capacity 6,500 L;
- flow rate 16 L/min (0.5 kg/cm²);
- operating temperature 4–40°C;
- operating pressure 1–4 kg/cm²;
- model ACORN,HF,PES,0.2,80(Y).
- Source note: specifications based on Taoyuan municipal tap water at 22.5°C, 1 kg/cm², 0.4 NTU turbidity;
- service life counted from initial flow until flow falls to 50%;
- performance varies with use and water quality.
Household acorn-shaped cartridge (catalog name: Household Acorn-shaped Filter Cartridge with Hollow Fiber Membrane)
PES hollow fiber, 0.2 μm, 0.17 m²; Ø48 × 105 mm · Source: 6,500 L / 16 L/min under its stated tap-water test conditions · Operating 4–40°C, 1–4 kg/cm²; outlet 1/4", P8 or P12 · Model printed identical to the 10-inch card — see full spec
Full spec
- Catalog name: Household Acorn-shaped Filter Cartridge with Hollow Fiber Membrane.
- Features listed on the source card (the supplier's wording;
- no test basis given on the card): high flow rate, long lifespan, high biocompatibility.
- Applications listed: tap water filtration, sterilizing filtration.
- Material polyethersulfone (PES);
- housing / sealing ABS / PU;
- outer diameter Ø48 mm;
- length 105 mm;
- retention rating 0.2 μm;
- connection outlet 1/4", P8, P12;
- membrane area 0.17 m²;
- capacity 6,500 L;
- flow rate 16 L/min (0.5 kg/cm²);
- operating temperature 4–40°C;
- operating pressure 1–4 kg/cm²;
- model ACORN,HF,PES,0.2,80(N) — exactly the same model string is printed on the 10-inch standard filter card, which is a different product;
- shown as printed, not resolved here.
- Source note: specifications based on Taoyuan municipal tap water at 22.5°C, 1 kg/cm², 0.4 NTU turbidity;
- service life counted from initial flow until flow falls to 50%;
- performance varies with use and water quality.
10-inch standard hollow-fiber cartridge (catalog name: 10-inch Standard Filter with Hollow Fiber Membrane)
PES hollow fiber, 0.2 μm, 1.8 m²; Ø68 mm × 10" · Source: 86,700 L ("75%", ΔP 0.5 kg/cm²) and 46 L/min — card gives no water/test conditions · Operating 10–65°C, 1–5 kg/cm²; outside-to-inside flow · DOE or 2-222 end caps; Buna-N / EPDM / Viton / silicone O-rings
Full spec
- Catalog name: 10-inch Standard Filter with Hollow Fiber Membrane.
- Features listed on the source card (the supplier's wording;
- no test basis given on the card): high flow rate, long lifespan.
- Applications listed: tap water filtration, sterilizing filtration, precision filtration.
- Material polyethersulfone (PES);
- housing / sealing PP / PU;
- outer diameter Ø68 mm;
- length 10";
- retention rating 0.2 μm;
- end cap double open end, 2-222 tail / fin tail;
- flow direction outside to inside;
- membrane area 1.8 m²;
- capacity 86,700 L (printed "75%, differential pressure 0.5 kg/cm²" — the card does not say what the 75% refers to);
- flow rate 46 L/min (0.5 kg/cm²);
- operating temperature 10–65°C;
- operating pressure 1–5 kg/cm²;
- O-ring Buna-N, EPDM, Viton, silicone;
- model ACORN,HF,PES,0.2,80(N) (identical to the acorn-shaped card — see that card).
- Unlike the other household cards, this card has no test-conditions note, so the capacity and flow figures come without stated water quality or test method.
Household composite cartridge with activated carbon (catalog name: Household Composition Filter Cartridge with Hollow Fiber Membrane)
PES hollow fiber + activated carbon; 0.2 μm; Ø48 × 255 mm · Source: 6,500 L / 16 L/min under its stated tap-water test conditions · Operating 4–40°C, 1–4 kg/cm²; outlet 1/4", P8 or P12 · Listed uses include chlorine removal (supplier wording)
Full spec
- Catalog name: Household Composition Filter Cartridge with Hollow Fiber Membrane.
- Features listed on the source card (the supplier's wording;
- no test basis given on the card): high flow rate, long lifespan, high biocompatibility, with activated carbon.
- Applications listed: tap water filtration, sterilizing filtration, chlorine removal.
- Material polyethersulfone (PES);
- housing / sealing ABS / PU;
- outer diameter Ø48 mm;
- length 255 mm;
- retention rating 0.2 μm;
- connection outlet 1/4", P8, P12;
- membrane area 0.17 m²;
- capacity 6,500 L;
- flow rate 16 L/min (0.5 kg/cm²);
- operating temperature 4–40°C;
- operating pressure 1–4 kg/cm²;
- model ACORN,HF,PES,0.2,80(Y200),AC100L.
- Source note: specifications based on Taoyuan municipal tap water at 22.5°C, 1 kg/cm², 0.4 NTU turbidity;
- service life counted from initial flow until flow falls to 50%;
- performance varies with use and water quality.
Hollow-fiber cartridge: outlets, usage precautions & performance charts (catalog alt: Hollow Fiber Filter Report)
Connection outlets: 1/4", P8, P12 · Precautions: avoid high pressure/temperature; do not freeze · Charts: flow vs pressure, flow vs total volume, PMI pore-size distribution, SEM images · The card itself says values are its own measurements, not guarantees
Full spec
- Connection outlet specs: 1/4", P8, P12 (shown with photos).
- Usage precautions printed on the card: product details may change without notice;
- component specifications are based on the company's own measurements and are not guaranteed values;
- avoid using under high pressure or temperature;
- do not freeze, it may damage the casing;
- the flow rate is for a single component and may decrease when combined with other filtration materials;
- comply with local regulations.
- The card also shows a "Flow Rate vs.
- Pressure Increase" chart (flux in L/m²·hr against pressure in bar), a "Flow Rate vs.
- Capacity" chart (flux against total water flow in tons), a PMI pore-size distribution plot and two scanning electron microscope images — the source gives no sample ID or test report for these charts, so they are shown as the company's own illustrations.
Filter Cartridge Spec Sheets
Cartridge types from the company catalog. Each card lists key points; expand "Full spec" or open the original image for complete details.
PP melt-blown cartridge
Polypropylene melt-blown, depth filtration, pre-filter stage · 0.5–50 μm; 5–40 in · Max 60°C; 0.3 MPa @20°C
Full spec
- Polypropylene, ⌀28mm inner / ⌀63mm or ⌀115mm outer, 5–40 inch lengths, 0.5–50 μm rating, DOE/2-222/2-226 end caps, 60°C max, max pressure 0.3 MPa@20°C / 0.2 MPa@40°C / 0.1 MPa@60°C.
- Depth filtration for liquids as a pre-filter stage.
PP industrial melt-blown cartridge
Three-layer PP for industrial process filtration · 0.5–50 μm; 5–40 in · Max 70°C; 0.3 MPa @20°C
Full spec
- Three-layer PP structure for precision industrial process filtration.
- Same ⌀28mm inner / ⌀63mm or ⌀115mm outer, 5–40 inch, 0.5–50 μm rating, DOE/2-222/2-226 end caps as the standard PP cartridge, but rated to 70°C, max pressure 0.3 MPa@20°C / 0.2 MPa@40°C / 0.1 MPa@70°C.
Absolute-rated cartridge
PP & PE; 1.0–150 μm; 10/20 in · Max 80°C; 0.55 MPa @20°C · "Up to 99%" at rated size is the source's claim — no test method given
Full spec
- Polyolefin (PP & PE) per the English-site table and both sites' feature lists (the Chinese-site table says polypropylene), ⌀30mm inner / outer ⌀62mm or ⌀68mm on the Chinese-site sheet but ⌀63mm or ⌀68mm on the English-site sheet (shown as printed, not resolved here), 10/20 inch, 1.0–150 μm rating, DOE/2-222/2-226 end caps, 80°C max, max pressure 0.55 MPa@20°C / 0.3 MPa@60°C / 0.2 MPa@80°C — the source states "up to 99%" efficiency at the rated micron size;
- no test method or conditions are given, so this is the supplier's claim.
String-wound cartridge
Yarn wound on a PP or stainless core; 1.0–100 μm · Max 60°C (PP) / 120°C (cotton) / 200°C (glass fiber) · 0.2 MPa @20°C
Full spec
- Textile yarn wound onto a porous core (PP / degreased cotton yarn / glass fiber over a PP or stainless-steel frame), ⌀28mm or ⌀30mm inner / ⌀63mm or ⌀115mm outer, 10/40 inch, 1.0–100 μm rating, DOE/2-222/2-226 end caps.
- Max temperature 60°C (PP), 120°C (degreased cotton yarn) or 200°C (glass fiber / stainless frame);
- max pressure 0.2 MPa@20°C.
PVDF & Nylon pleated cartridges
PVDF: 0.1–0.45 μm, pH 1–13, max 90°C · Nylon: 0.1–5 μm, pH 6–14, max 80°C · 0.4 MPa @20°C; DOE / 2-222 / 2-226 end caps
Full spec
- PVDF: 0.1/0.22/0.45 μm rating, pH 1–13, 90°C max, max pressure 0.4 MPa@20°C / 0.2 MPa@90°C — for strong-solvent, high-viscosity, strong-oxidant or higher-temperature liquids.
- Nylon: 0.1–5 μm rating, pH 6–14, 80°C max, max pressure 0.4 MPa@20°C / 0.2 MPa@80°C — for alkaline-solvent filtration (benzene, ketone, alcohol, ether and similar chemicals).
- Both available in DOE/2-222/2-226 end-cap variants.
- End-cap table on the source (mm, outer diameter 69 for all): double open end (DOE) length incl. connectors 250, no end-cap diameter;
- 222 flat / 222 fin 290, end-cap diameter 55 / 45;
- 226 flat / 226 fin 264, end-cap diameter 55 / 45.
PP pleated cartridge
Polypropylene pleated; 0.1–50 μm; 5–40 in · Max 80°C; 0.4 MPa @20°C · Listed uses: acid/alkali/solvent clarification, photoresist, ink and coatings
Full spec
- Polypropylene, ⌀28mm inner / ⌀69mm outer, 5–40 inch, 0.1–50 μm rating, pH 1–13, DOE/2-222/2-226 end caps, 80°C max, max pressure 0.4 MPa@20°C / 0.2 MPa@80°C.
- For clarifying acids/alkalis/solvents, photoresist/developer final filtration, and ink/coating/adhesive final filtration.
Extra-high-flow & high-flow pleated cartridges
Extra-high-flow: Ø152 mm, 20–60 in, 1–100 μm · High-flow: Ø70/115 mm, 10–40 in, 1–50 μm · Listed uses include RO pre-filtration and desalination pretreatment
Full spec
- Extra-high-flow: fiberglass/PP, ⌀152mm outer, 20/40/60 inch, 1–100 μm rating, 80°C max, max pressure 0.24 MPa@20°C — for chemical filtration, power-plant condensate, paint/coating filtration, RO pre-filtration and seawater desalination pretreatment.
- High-flow: PE/PP, ⌀70mm or ⌀115mm outer / ⌀28mm inner, 10–40 inch, 1–50 μm rating, 60°C max, max pressure 0.4 MPa@20°C — for PCW filtration, RO pre-filtration, chemical process and beverage.
PES & PTFE (hydrophobic/hydrophilic) pleated cartridges
PES: 0.05–1.2 μm, pH 2–13, max 80°C · PTFE hydrophobic: liquid 0.1–0.45 μm / gas 0.01–0.02 μm · PTFE hydrophilic: 0.22 / 0.45 μm, pH 1–14, max 90°C
Full spec
- PES: 0.05–1.2 μm rating, pH 2–13, 80°C max, max pressure 0.4 MPa@20°C / 0.2 MPa@80°C — listed uses: ultrapure-water final filtration and high-purity chemicals (ketones, esters, alcohols).
- PTFE hydrophobic: liquid 0.1/0.22/0.45 μm or gas 0.01/0.02 μm rating, pH 1–14, 90°C max, max pressure 0.4 MPa@20°C / 0.2 MPa@90°C — listed uses: polar-solvent filtration, high-purity gas filtration, corrosive or strong-oxidant liquids.
- PTFE hydrophilic: 0.22/0.45 μm rating, pH 1–14, 90°C max, max pressure 0.4 MPa@20°C / 0.2 MPa@90°C — listed uses: high-temperature liquids, strong-corrosive liquids, and sterile filtration of pharmaceutical raw materials.
Large-diameter pleated cartridge & capsule cartridge
Large-diameter pleated: Ø83 / Ø131 mm, 10 in · PP / PES / PTFE / hydrophilic PTFE media · Capsule: PP housing, PP / PES / PTFE / nylon media
Full spec
- Large-diameter pleated: PP/PES/PTFE/hydrophilic-PTFE media, ⌀83mm or ⌀131mm outer / ⌀28mm inner, 10 inch, rating 0.1–50 μm (PP), 0.22–1.2 μm (PES), 0.22–10 μm (PTFE) or 0.5–1 μm (hydrophilic PTFE), 222/226/334 sealed end caps, 80–90°C max, max pressure 0.4 MPa@20°C.
- Capsule cartridge: PP/PES/PTFE/Nylon media in a PP housing with PP support, rating 0.1–50 μm (PP), 0.05–1.2 μm (PES), 0.1–1 μm (Nylon), 0.1/0.22/0.45 μm liquid or 0.01/0.02 μm gas (PTFE;
- both sites print the second value as "02 μm") — for pharma/chemical, bioprocessing/electronics/cosmetics, and food/beverage/ink/gas filtration.
Carbon-block & carbon-cloth activated-carbon cartridges
Carbon block: 5/10 μm, max 75°C — chlorine, odor, organics · Carbon cloth: 10 μm, max 65°C — plating, PCB chemicals · 10/20 in
Full spec
- Carbon-block: coal-based carbon, ⌀28mm or ⌀30mm inner / ⌀65mm or ⌀70mm outer, 10/20 inch, 5/10 μm rating, 75°C max, max pressure 0.3 MPa@20°C — for drinking water, pure-water systems and internal-circulation filtration, removing residual chlorine, odor and organics.
- Carbon-cloth: activated-carbon cloth, ⌀28mm inner / ⌀65mm outer, 10/20 inch, 10 μm rating, 65°C max, max pressure 0.4 MPa@20°C — for surface treatment, electroplating and PCB chemical filtration.
Carbon-fiber activated-carbon cartridge
Activated carbon fiber; 10 μm; 10/20 in · Max 65°C; 0.4 MPa @20°C · "5–10× adsorption" is the source's claim — no test method given
Full spec
- Activated carbon fiber, ⌀28mm inner / ⌀68mm outer, 10/20 inch, 10 μm rating, 65°C max, max pressure 0.4 MPa@20°C — the source describes it as designed for the electroplating and chemical industries, with adsorption "5–10×" that of a standard cartridge — the supplier's claim;
- no test method or comparison basis is given.
- Source card notes "Made in Japan."
Sintered Metal Cartridges & Filter Bags
Spec cards from the catalog. Each card lists key points; expand "Full spec" or open the original image for complete details.
Sintered metal filter cartridges (3 types)
Planar sintered / pleated wire-mesh / sintered-powder types · SUS304, SUS316L, titanium, nickel, copper, other alloys · Retention 0.5–200 μm; length 5–40 in (custom) · Source gives two differing temperature/pressure figures — pending confirmation
Full spec
- Three types are pictured: Planar Sintered Metal Filter Cartridge (name and photo only — the source card gives no description or figures for this type), Pleated Wire Mesh Filter Cartridge, and Sintered Powder Filter Cartridge.
- Pleated wire mesh: sintered from imported stainless steel into a porous depth-type medium with a trapezoidal, coarse-to-fine pore structure;
- described as offering absolute filtration, high dirt-holding capacity and a high open area;
- its own text states max. operating temp 480°C and max. operating differential pressure "5 bar and above, custom specifications".
- Sintered powder: stainless-steel powder pressed in molds and sintered at high temperature;
- its own text states max. operating temp 480°C and max. operating differential pressure "3 bar and above, custom specifications".
- A table printed below all three types (with no label saying which type, component or condition it applies to) lists: material SUS304 / SUS316L / titanium / nickel / copper / other alloys;
- length 5–40 inch, custom;
- retention rating 0.5–200 μm;
- end cap double open end / 2-222 / 2-226 / various locking threads;
- max. operating temp 65°C;
- max. operating pressure 0.5–1.5 MPa;
- max. operating differential pressure 0.4 MPa at 20°C.
- Unresolved: the table's 65°C / 0.4 MPa conflict with the 480°C / 3–5 bar stated per type, and the source does not say whether the table refers to the cartridge, a housing or seal, or a specific test condition.
- Neither figure should be relied on until confirmed by the company.
Non-woven filter bag
PP (90°C) or polyester (135°C) · Retention 0.5–300 μm · Sewn or thermal-fusion welded · 6 listed sizes, custom available
Full spec
- A singeing process is described as preventing fiber shedding and filtrate contamination;
- three-layer fluffy filtration structure for solids and colloidal particles;
- long, high-strength fibers.
- Material PP or polyester (source table: PP 90°C, acid/alkali resistance "great";
- polyester 135°C, "average").
- Ring: stainless steel, galvanized, nylon, PP or PE.
- Type: sewn or thermal-fusion welded.
- Retention rating 0.5–300 μm.
- Sizes listed: 1# φ180×420 mm, 2# φ180×810 mm, 3# φ105×230 mm, 4# φ105×380 mm, 5# φ150×520 mm, Y series φ202×330 mm (6 listed sizes), plus other special specifications on request.
Mesh filter bag
Nylon or PEMO (polyester) monofilament mesh · Nylon 10–800 mesh; PEMO 20–420 mesh · Removable and washable for reuse · 6 listed sizes, custom available
Full spec
- Described as offering high dirt-holding capacity, high flow rate and pressure resistance, and as removable and washable for repeated use;
- suited to liquids with high impurity loads.
- Spec table material: Nylon or PEMO (source temperature table: nylon 160°C, acid resistance "bad", alkali "great";
- polyester 135°C, "average").
- Ring: stainless steel, galvanized, nylon, PP or PE.
- Type: sewn or thermal-fusion welded.
- Retention rating: nylon 10–800 mesh, PEMO 20–420 mesh.
- Sizes listed: 1#–5# (φ180×420, φ180×810, φ105×230, φ105×380, φ150×520 mm) and Y series φ202×330 mm (6 listed sizes), plus other special specifications.
Stainless steel & PTFE filter bags
Stainless: SUS304/SUS316 monofilament mesh, 60–500 mesh, reusable · PTFE: source states >250°C continuous, 280°C short-term · Chemical-resistance wording is the supplier's claim — see full spec · Stainless 4 listed sizes; PTFE 6 listed sizes; custom available
Full spec
- Stainless steel filter bag: SUS304 or SUS316 woven to specification and heat-set into a monofilament mesh;
- described as high-strength, not deforming under pressure changes, smooth and easy to clean for reuse.
- Ring stainless steel or galvanized;
- retention rating 60–500 mesh;
- sizes listed 1#–4# (φ180×420, φ180×810, φ105×230, φ105×380 mm), plus other special specifications.
- PTFE filter bag: the source states it can operate continuously above 250°C and withstand 280°C instantaneously, and describes it as "completely resistant to acids, alkalis and oxidation, nearly non-flammable, and the only fiber that does not age", with "an extremely long service life".
- These are the supplier's catalog wording, not an unconditional guarantee — PTFE compatibility still depends on the specific chemical, concentration, temperature and mechanical conditions.
- Ring stainless steel or galvanized;
- retention rating 60–500 mesh;
- sizes listed 1#–5# (as above plus φ150×520 mm) and Y series φ202×330 mm (6 listed sizes), plus other special specifications.
Coated & antistatic dust-collection filter bags
Coated: PTFE microporous membrane on the bag materials listed · Source states capture down to 2.5 μm dust — no test conditions given · Antistatic: antistatic polyester needle-punched felt · Includes an 8-material comparison table
Full spec
- Coated filter bag: the source says coated versions are offered for all the materials on the card, and that its PTFE microporous membranes are "highly effective in filtering out dust particles as small as 2.5 micrometers", describing them as a solution for PM2.5 and for keeping emissions "below 10 mg/Nm³ in various conditions".
- These are the supplier's statements;
- the card gives no test method, operating conditions or report, and actual emissions depend on system design, dust properties and operation — not a guarantee.
- Antistatic dust collection filter bags: made from antistatic polyester needle-punched felt;
- the card explains that combustible dust (e.g. flour, chemical powders, coal) above its explosion limit can ignite from static discharge, and that baghouses handling such dust need antistatic needle-punched felt.
- The card also includes a comparison table for 8 materials (polypropylene, polyester, acrylic, PPS, aramid, P84, PTFE, fiberglass): continuous dry/wet heat temperature, short-term max dry heat, density, moisture regain, flammability and chemical resistance.
Oil sorbent & absolute filter bags
Oil sorbent: multi-layer composite, oil absorption + particle capture · Absolute: source says 100% welded construction, gradient depth filtration · Efficiency figure (>99.98%) is the source's claim, no test method given · Oil sorbent: 5 listed sizes, custom available
Full spec
- Oil sorbent filter bag: described as quickly adsorbing various oils exceeding its own weight;
- multi-layer composite depth-filtration structure combining oil absorption and impurity capture;
- broad chemical compatibility, high dirt-holding capacity.
- Material composite;
- ring stainless steel or PP;
- sizes listed 1#–5# (φ180×420, φ180×810, φ105×230, φ105×380, φ150×520 mm), plus other special specifications.
- Absolute filter bag: the source lists it for high-precision filtration and states gradient depth filtration "exceeding 99.98% efficiency" — no particle size, test method or conditions are given on the card, so this is the supplier's claim.
- The source also describes a 100% welded construction to avoid pinhole leakage, with a self-adjusting sealing edge.
- Applications listed: food & beverage, pharmaceutical, microelectronics, chemical, ink and water treatment.
Dust collector filter bags — general, acrylic & PPS
How a baghouse dust collector works (diagram) · Acrylic felt: peak 140°C, normal 120°C · PPS felt: peak 140°C, for high-sulfur flue gas · Temperatures are catalog values — confirm for your conditions
Full spec
- Dust filter bag (general): the card explains the baghouse dust collector — dust-laden air enters through the inlet, a baffle plate drops larger particles into the hopper by inertia, the air then passes into the filter-bag chamber;
- dust collects on the bag's outer surface while cleaned air passes through the media and exits through the outlet;
- an internal cage supports the bag and aids cake release.
- Acrylic dust collector filter bag: needle-punched felt on an acrylic woven scrim for strength, described as having good chemical and hydrolysis resistance;
- listed uses asphalt plants, dryers, coal mills, power-plant sintering machines;
- material homopolymer acrylic (polyacrylonitrile), air permeability 14 m³/m²·min @200 Pa, peak operating temp 140°C, normal operating temp 120°C.
- PPS dust collector filter bag: polyphenylene-sulfide fiber, described as chemically stable and suited to high-sulfur flue gas;
- listed uses coal-fired boilers, power plants, waste incineration;
- material PPS needle-punched felt, peak operating temp 140°C.
Dust collector filter bags — aramid, P84, PTFE & fiberglass
Aramid: 204°C long-term, 240°C short-term · P84 (polyimide): up to 260°C · PTFE and fiberglass felts for harsh flue gas · Temperatures are catalog values — confirm for your conditions
Full spec
- Aramid filter bag: listed as withstanding 204°C long-term and 240°C short-term, with strong alkali and moderate acid resistance, for gases around 180–220°C;
- uses listed: steel, cement, power, chemical.
- P84 high-temperature filter bag: needle-punched polyimide felt, listed up to 260°C;
- the source says its lobed fiber cross-section improves filtration efficiency, with hydrolysis and oxidation resistance;
- uses listed: concrete mixing, cement, waste incineration, coal-fired boilers.
- PTFE dust collector filter bag: described as resistant to high temperature, abrasion, corrosion and chemical attack;
- for harsh flue gas in steel, power generation, waste incineration.
- Fiberglass filter bag: described as heat- and corrosion-resistant, dimensionally stable with low elongation and high strength;
- 3D microporous felt with high porosity and low air resistance;
- uses listed: steel, metallurgy, carbon black, power, cement, chemical.
Air-compressor filter cartridge cross-reference chart
Reference chart, not a product spec · Maps cartridges to 8 third-party compressor-filter brands · Not a claim of affiliation with those brands
Full spec
- A compatibility/cross-reference chart, not a standalone mbranfiltra product spec: it maps the company's air-compressor filter cartridges against 8 third-party compressor-filter brands' model ranges and filtration grades — Domnick Hunter (K009–K620), Donaldson/Ultrafilter (02/05–30/50), Zander (1030–3075), Hankison (12–48), Hiross (004–240), Parker (10-25–85-360), BEA (30–1400), SMC (150–850) — each with its own filtration-grade code list.
- Shown for reference only, not as a claim that mbranfiltra manufactures for or is affiliated with these brands.
Performance statements (temperature, chemical resistance, efficiency, emissions) are quoted from the supplier's original catalog graphics — they are not independent test results or unconditional guarantees. Actual suitability depends on operating conditions; please confirm with us for your application.
Bag Filter Housings
Stainless-steel housings that hold filter bags for liquid filtration. Catalog model names are kept as printed; each card lists key points, with the full spec and original images behind it.
PT top-inlet bag filter (catalog name: PT Top-Inlet Baghouse Filter)
Stainless-steel bag filter housing for liquids (per the source drawing) · SUS304 / SUS316 / SUS316L · Design 15 kg/cm² (225 psi); operating 10 kg/cm² (150 psi) · Listed uses: petrochemical, chemical, high-temp/pressure, high-viscosity
Full spec
- Catalog name: PT Top-Inlet Baghouse Filter.
- A stainless-steel bag filter housing with a perforated basket;
- the company's parts drawing labels the ports water inlet / water outlet (入水口 / 出水口) and gives flow in m³/hr and GPM and capacity in litres.
- Applications listed: petrochemical processing, chemical processing, high-temperature/pressure filtration, high-viscosity filtration.
- Material SUS304 / SUS316 / SUS316L;
- inlet & outlet 2"–2.5" threaded or flange (note: the ordering-code table on the same card also lists 30 = 3");
- discharge port 1/4" PT-F;
- exhaust port 1/4" PT-F;
- O-ring EPDM, optional Viton or Teflon-coated Viton;
- designed pressure 15 kg/cm² (225 psi);
- operating pressure 10 kg/cm² (150 psi);
- surface treatment external electrolysis and internal pickling, optional X-ray or EP electrolysis.
- Ordering code: bag size 1 = No.1 / 2 = No.2;
- material 4 = SUS304, 6 = SUS316, 6L = SUS316L;
- position SB = side inlet/bottom outlet, SS = side inlet/side outlet;
- size 20 = 2", 25 = 2-1/2", 30 = 3";
- connection P = PT, N = NPT, J = JIS 10K, A = ANSI 150P, D = DIN PN10, C = clamp;
- O-ring E = EPDM, V = Viton, S = silicone, N = NBR, Q = Teflon + silicone;
- finish A = pickling, E = electrolysis, P = polished, S = sandblasting.
PT top-inlet bag filter — parts & dimensions
12 labeled parts incl. basket and water inlet/outlet · No.1: flow 20 m³/hr (90 GPM), 16 L, 40 kg · No.2: flow 45 m³/hr (200 GPM), 31 L, 48 kg
Full spec
- Parts (labeled bilingually on the original): 1 handle, 2 vent, 3–4 O-rings, 5 top cover, 6 shell flange, 7 eye bolt, 8 inlet (入水口), 9 shell, 10 basket, 11 outlet (出水口), 12 support leg.
- Dimensions (mm), 1PC-Bag No.1 / No.2: A Ø216 / Ø216;
- B 555 / 905;
- C 390 / 740;
- D 270 / 270;
- E 515 / 515;
- F (PCD) Ø310 / Ø310;
- G Ø12 / Ø12;
- flow rate 20 / 45 m³/hr and 90 / 200 GPM (printed "GMP" on the source);
- weight 40 / 48 kg;
- capacity 16 / 31 L.
PL single-bag filter housing (catalog name: PL Single Bag Baghouse Filter)
4 sizes (Bag No.1–No.4): 4.5–45 m³/hr, 11–46 L · SUS304 / SUS316 / SUS316L; 1/2"–3" threaded, flange or sanitary fittings · Design 15 kg/cm² (225 psi); operating 10 kg/cm² (150 psi) · Listed uses: beverage, RO prefiltration, PCW, circulation, chemical, reclaimed water, electrophoretic coating
Full spec
- Catalog name: PL Single Bag Baghouse Filter.
- Applications listed: beverage industries, RO prefiltration, PCW filtration, circulation filtration, chemical processing, reclaimed water filtration, electrophoretic coating filtration.
- Material SUS304 / SUS316 / SUS316L;
- inlet & outlet 1/2"–3" threaded, flange or sanitary fittings;
- discharge port 3/4" PT-M;
- exhaust port 1/4" PT-F;
- O-ring EPDM, optional Viton or Teflon-coated Viton;
- designed pressure 15 kg/cm² (225 psi);
- operating pressure 10 kg/cm² (150 psi);
- surface external electrolysis and internal pickling, optional X-ray or EP electrolysis.
- Ordering code: bag 1–4 = Bag No.1–No.4;
- material 4 / 6 / 6L = SUS304 / SUS316 / SUS316L;
- position SB side-in/bottom-out, SS side-in/side-out;
- size 04 = 1/2", 06 = 3/4", 10 = 1", 15 = 1-1/2", 20 = 2", 25 = 2-1/2", 30 = 3";
- connection P = PT, N = NPT, J = JIS 10K, A = ANSI 150P, D = DIN PN10, C = clamp;
- O-ring E / V / S / N / Q (EPDM / Viton / silicone / NBR / Teflon + silicone);
- finish A pickling, E electrolysis, P polished.
- Parts (bilingual on the original): clamp, vent, top cover, O-ring, shell flange, filter bag plate, inlet (入水口), shell, basket, bottom cover, outlet (出水口), support leg.
- Dimensions (A / B / C / D / E / F PCD / G, mm;
- flow m³/hr / GPM;
- weight kg;
- capacity L): No.1 Ø232 / 735 / 550 / 176 / 515 / Ø323 / Ø12; 20 / 90; 21;
- 27 — No.2 Ø232 / 1190 / 1005 / 176 / 515 / Ø323 / Ø12; 45 / 200; 26;
- 46 — No.3 Ø180 / 535 / 360 / 150 / 350 / Ø252 / Ø12; 4.5 / 20; 14;
- 11 — No.4 Ø180 / 670 / 495 / 150 / 350 / Ø252 / Ø12; 9 / 45; 15;
- 14. (GPM is printed "GMP" on the source.)
PV / PH single-bag high-pressure filter housings (catalog name: PV/PH Single Bag High-Pressure Baghouse Filter)
PV: Bag No.1/No.2, 20 / 45 m³/hr, 23 / 37 L · PH: Bag No.3/No.4, 4.5 / 9 m³/hr, 6.3 / 7.8 L · SUS304 / SUS316 / SUS316L; design 15 kg/cm² (225 psi), operating 10 kg/cm² (150 psi) · Listed uses: beverage, RO prefiltration, PCW, circulation, chemical, reclaimed water
Full spec
- Catalog name: PV/PH Single Bag High-Pressure Baghouse Filter (one shared spec sheet for both models).
- Applications listed: beverage industries, RO prefiltration, PCW filtration, circulation filtration, chemical processing, reclaimed water filtration.
- Material SUS304 / SUS316 / SUS316L;
- inlet & outlet 1/2"–3" threaded or flange;
- discharge port 3/4" PT-M;
- exhaust port 1/4" PT-F;
- O-ring EPDM, optional Viton or Teflon-coated Viton;
- designed pressure 15 kg/cm² (225 psi);
- operating pressure 10 kg/cm² (150 psi);
- surface external electrolysis and internal pickling, optional X-ray or EP electrolysis.
- Ordering code: PV takes bag 1 / 2 (No.1 / No.2) and sizes 04–30 (1/2"–3");
- PH takes bag 3 / 4 (No.3 / No.4) and sizes 04–25 (1/2"–2-1/2");
- shared options: material 4 / 6 / 6L, position SB / SS, connection P / N / J / A / D / C, O-ring E / V / S / N / Q, finish A pickling, E electrolysis, P polished, S sandblasting.
- PV parts (12, bilingual): handle, vent, O-ring, top cover, shell flange, eye bolt, filter bag plate, inlet (入水口), shell, basket, outlet (出水口), support leg.
- PV dimensions (A / B / C / D / E / F PCD / G, mm;
- flow m³/hr / GPM;
- kg;
- L): No.1 Ø232 / 735 / 545 / 176 / 515 / Ø323 / Ø12; 20 / 90; 34;
- 23 — No.2 Ø232 / 1115 / 925 / 176 / 515 / Ø323 / Ø12; 45 / 200; 43; 37.
- PH parts (13, bilingual): handle, top cover, vent, O-ring, eye bolt socket, shell flange, eye bolt, basket, filter bag plate, inlet/outlet port (入/出水口), shell, bottom cover, support leg.
- PH dimensions: No.3 Ø180 / 485 / 350 / 150 / 350 / Ø252 / Ø12; 4.5 / 20; 18;
- 6.3 — No.4 Ø180 / 585 / 450 / 150 / 350 / Ø252 / Ø12; 9 / 45; 21;
- 7.8. (GPM is printed "GMP" on the source.)
PM high-flow multi-bag filter housing (catalog name: PM High-Flow Multi-Bag Baghouse Filter)
2–12 bags per housing; 90–540 m³/hr in the dimension table · SUS304 / SUS316 / SUS316L; 2"–15" flange per spec table (order codes list up to 12") · Design 10 kg/cm² (150 psi); operating 7 kg/cm² (100 psi) · Listed uses: beverage, RO prefiltration, PCW, circulation, chemical, reclaimed water, electrophoretic coating
Full spec
- Catalog name: PM High-Flow Multi-Bag Baghouse Filter.
- Applications listed: beverage industries, RO prefiltration, PCW filtration, circulation filtration, chemical processing, reclaimed water filtration, electrophoretic coating filtration.
- Material SUS304 / SUS316 / SUS316L;
- inlet & outlet 2"–15" flange;
- discharge port 2" PT-M;
- exhaust port 1/2" PT-F;
- O-ring EPDM, optional Viton or Teflon-coated Viton;
- designed pressure 10 kg/cm² (150 psi);
- operating pressure 7 kg/cm² (100 psi);
- surface external electrolysis and internal pickling, optional X-ray or EP electrolysis.
- Ordering code: number of bags 2–12;
- bag 1 / 2 (No.1 / No.2);
- material 4 / 6 / 6L;
- position BB bottom-in/bottom-out, SS side-in/side-out;
- size 20 = 2", 25 = 2-1/2", 30 = 3", 40 = 4", 50 = 5", 60 = 6", 80 = 8", Y = 10", Y2 = 12";
- connection P / N / J / A / D / C;
- O-ring E / V / S / N / Q;
- finish A pickling, E electrolysis, P polished, S sandblasting.
- Note: the spec table says up to 15" while the ordering codes stop at 12" — not resolved here.
- Parts (18, bilingual): turntable, screw rod, davit, vent, top cover, top cover flange, eye nut socket, O-ring, filter bag plate, shell flange, eye bolt socket, eye bolt, shell, basket, bottom cover, inlet/outlet port (入/出水口), drain, support leg.
- The dimension table lists 27 configurations (2PC to 12PC, all Bag No.2, with 3F–10F connections): shell Ø406–Ø965 mm, height B 1422–2161 mm, flow 90 m³/hr (2 bags) to 540 m³/hr (12 bags), weight 97–735 kg, capacity 116–854 L — see the original image for each row.
Testing, Equipment & Packaging
Testing & Certification
SGS report PX/2020/A011301 (sample MF02-M1, 2020-10-23): E. coli removal/clearance rate above 99.9%.
BenQ Dialysis Technology report BDT-NT-231207 (sample MF002, 2023-12-20): E. coli removal/clearance rate above 99.9%.
Taiwan–US Testing Technology (SUPERLAB) report M61-200200105 (mfd. 2019/12, 2020-02-13; pages 1–2 of the same 5-page report): no plasticizers or heavy metals detected (applies to this sample only).
Each result applies only to the sample and date tested — not a guarantee for the whole product line or for the housings and cartridges listed on this page.
Laboratory Equipment
Our laboratory has a capillary flow porometer, a water-quality analyzer and other specialized equipment for pore-size, material and water-sample analysis.
To discuss an analysis, describe the sample type, the material or water source, the questions you want answered and the intended application.
Contact us for technical information and to discuss sample requirements.
Custom Packaging
Hollow-fiber membranes can be packaged into cartridges of different sizes for product development and equipment integration. Discuss membrane materials, cartridge dimensions and how the cartridge will fit your product.
For an inquiry, provide the intended application, available installation space, housing or connection details and estimated quantity. If drawings or samples are available, mention them to help define the packaging requirements.
Need specifications or customization?
Tell us the use, model and quantity; we will reply with what we can provide.